Drilling RIG Gear Oil pumpSuitable for conveying non-solid particles and fibers, non-corrosive, medium temperature not higher than 60 ℃, lubricating oil or other liquids of similar nature to lubricants. Drilling RIG Gear Oil pump application range: In the oil transmission system can be used as transmission, booster pump, plywood machinery, vulcanizing machine machinery, construction machinery, rare oil station, in the fuel system can be used as conveyor, pressurized, jet fuel pump, in the use of industrial areas, can be used as lubricant pump. When installing the rig gear oil pump, if the shaft diameter outside the surface roughness is low or there are rust spots, rust, hair thorns and other defects, if this problem will be used with fine sand cloth or oil stone grinding smooth, in the corresponding position to apply oil or grease to play a clean role. In order to prevent scratching the oil seal lip, then we need to seal the outer ring coated with sealant, and then use the hard paper shaft to wrap it up, with the corresponding tool of the oil seal rotation pressure, do not make hard hit, to prevent oil seal deformation or breakage.
It should be noted that:
1, do not tighten the inner spring without permission when the shaft diameter is not worn and the oil seal spring is elastic enough.
2, drilling rig gear oil pump used in agricultural machinery oil SEAL general working conditions, large environmental temperature difference, dust, equipment vibration frequently so that the mechanical condition of the machine parts constantly change, to check, maintain and maintain.
3, drilling rig gear oil pump should often check the oil level of the rig gear pump. If there are too many oil impurities, containing alloy powder and metal scrap, replace the new oil. The brand and quality of the oil should meet the requirements of the season.
4, drilling rig gear oil pump temporarily do not use oil seal, should be properly kept to prevent oil, dust or sun exposure.
- How to reduce the vibration and noise of gear oil pump
- How to determine the method analysis of the fault of double-linked hydraulic pump
- Characteristics of four-linked gear oil pump
- Characteristics and application points of stainless steel gear oil pump
- Maintenance and precautions of triple hydraulic Pump
- Main causes of wear of hydraulic pump of crane
- Large flow of construction machinery gear pump How to maintain it for a long time
- Three problems needing attention in the operation of gear oil pump
- How to repair the wear of gear oil pump Parts